Widget HTML #1

blog untuk belajar seo dan blog

✅ NEW DESIGN BOX SPEAKER 12X2 KARAKTER BASS MODEL (SW212a bandpass )

 Desain box speaker 12inch double 500 watt


KOMPONEN box speaker SPEAKER  12LW800 500WATT untuk menghasilkan suara yang sama seperti aslinya, perhatikan pada table yang ada di gambar jika anda ingin mengunakan produk lokal supaya suara tidak beda jauh, pada table diatas kami sudah menyediakan spesifikasi dari box speaker maka sebaiknya anda cocokan dengan komponen milik anda supaya tidak jauh beda dengan yang aslinya

Box speaker 12isi dua ini juga sangat direkomendasikan untuk indor rumahan dengan bass yang rendah, dan jika anda ingin mengunakan box speaker ini di lapangan maka bentuk box speaker 12x2 bisa dijadikan sebagai foh yang baik dengan diperuntuhkan untuk LOW MID 


Boxing a speaker, or building an enclosure for it, involves creating a box that fits the speaker and optimizes its performance. Here's a basic guide to help you through the process:

1. Determine the Speaker's Specifications:

  • Check the speaker's datasheet for recommended box volume and type (sealed or ported).

2. Choose the Type of Enclosure:

  • Sealed Enclosure: Provides tight, accurate bass but less output compared to ported enclosures.
  • Ported Enclosure: Includes a port or vent to enhance bass output but can be more complex to build.

3. Design the Box:

  • Sealed Box: Calculate the internal volume required using the speaker's specs.
  • Ported Box: Calculate the internal volume and port dimensions. Tools and calculators are available online to help with this.

4. Gather Materials:

  • Wood or MDF: Common choices for speaker boxes due to their density and ease of work.
  • Screws or Adhesive: To assemble the box.
  • Sealant: To ensure airtight seals, especially in sealed boxes.

5. Cut the Panels:

  • Front Panel: Cut the hole for the speaker.
  • Other Panels: Cut to fit the dimensions of the box.
  • Use a jigsaw or circular saw for accurate cuts.

6. Assemble the Box:

  • Attach the panels using screws or adhesive.
  • Ensure all joints are sealed with sealant or wood glue to prevent air leaks.

7. Install the Speaker:

  • Secure the speaker in the hole using screws.
  • Connect the speaker wires to the terminals.

8. Finish the Box:

  • Sand and paint or cover the box as desired for aesthetics.

9. Test the Speaker:

  • Play music through the speaker to ensure it sounds as expected.

If you’re unsure about specific calculations or designs, consider using online calculators or templates based on your speaker’s specifications.