1 SET box speakers log model LF RCF KOMPONEN

 

It seems like you're referring to a "Box Top Coaxial", but the term isn't widely recognized as a standard phrase. However, I can provide some context based on the terms involved.

1. Coaxial Cable:
   • Coaxial cables are widely used for transmitting data, audio, video, and other signals. The cable consists of an inner conductor, an insulating layer, a shield (usually made of metal mesh), and an outer insulating layer. This construction minimizes interference and allows for reliable transmission over long distances.
2. Box Top:
   • "Box Top" could refer to the physical packaging or enclosure at the top of a device or component, such as a "junction box" or "termination box" used in cable management.
   • In some contexts, "box top" might also mean the part of the device housing where connections, such as coaxial cable, are inserted or terminated.

If you're referring to a coaxial connection or component housed inside a box, this could mean a system where coaxial cables are connected to a box for purposes like signal distribution, power management, or data processing.

For instance, in some setups:

• Coaxial Cable Junction Box: A box designed to house multiple coaxial cable connections (often used in TV or network setups).
• Coaxial Termination Box: A device that helps manage coaxial cables and their connections, often used in networking, CCTV systems, or telecommunications.

15 MODEL BAND PASS

A "Box Model Band Pass" generally refers to a type of signal filtering technique or a frequency filtering system. It can be seen in both signal processing and electrical engineering contexts. Here’s a general breakdown of its components:

1. Band-Pass Filter:

   • A band-pass filter allows signals within a certain frequency range to pass through while attenuating frequencies outside that range. It is typically used in scenarios where you want to isolate a specific band of frequencies for analysis or processing.
   • The filter has two key frequency points:
     • Lower cut-off frequency (where the filter starts allowing signals through),
     • Upper cut-off frequency (where the filter stops passing signals).
   • This creates a "band" of frequencies that can pass through, hence the term "band-pass."

2. Box Model:

   • In some contexts, especially in systems or electronics, a "box model" is a simple abstraction that represents the system (like a filter) as a "black box" with inputs and outputs. It abstracts away the internal workings, focusing only on what comes in and what comes out.
   • When you combine this concept with a band-pass filter, it often means considering a system that takes a wide range of signals as input and filters out everything except the desired frequency range, simplifying its behavior as a "box" with defined output characteristics.

In signal processing, a Box Model Band Pass Filter could represent such a system where you input a signal, the filter passes the frequencies within the designated band, and outputs only those frequencies, with the rest being blocked.

SUB MODEL BAS REFLEX

Reflex bass" atau bass refleks adalah jenis desain speaker yang menggunakan port atau saluran untuk meningkatkan output bass pada frekuensi tertentu. Prinsipnya adalah memanfaatkan gelombang suara yang keluar dari bagian belakang speaker untuk memperkuat suara yang dihasilkan oleh driver bass di bagian depan speaker.

Speaker dengan desain bass refleks seringkali lebih efisien dalam menghasilkan bass rendah dibandingkan dengan desain sealed (tertutup), karena port memungkinkan udara bergerak lebih bebas dan membantu menghasilkan lebih banyak tekanan udara di frekuensi bass. Hal ini membuat bass terdengar lebih kuat dan lebih jelas, terutama pada volume rendah hingga sedang.